1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
Ka sɛn sɔgɔsɔgɔninjɛ
Specifications:
Product Name | BLITZ E55R 4-IN-1 ESC (G2) |
Input Voltage | 2-6S |
Max. Continuous Current | 55A |
Max. Burst Current | 65A |
MCU | G071 |
BEC | No |
Firmware | BLHeli32 |
Current Sensor | Yes |
Current rate | 200 |
Telemetry | Supported |
Target | IFLIGHT_BLITZ_G2 |
Mounting Holes | 20 x20 mm/ Φ4mm |
Weight | 11.3g |
Protocol | Supports DShot150/300/600/MultiShot/ OneShot etc. |
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
Product Name | BLITZ Mini F7 V1.1 Flight Controller |
MCU | STM32 F722 |
Gyro | BMI270 |
Barometer | DPS310 |
OSD Chip | AT7456 |
Flash | 16MB (Blackbox flash) |
UARTS | 6 |
Motor outputs | 4x (SH1.0 connector) |
I2C serial | SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported |
LED controller | Yes |
Beeper pad | Yes |
Firmware target | IFRC-IFLIGHT_BLITZ_F722 |
Mount pattern | 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws |
Dimensions | 30.5x27 mm |
Weight | 5g |
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
Features:
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">Improved circuit design, better components and lower electrical noise!color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">DJI HD VTX Connector (Plug-and-Play / No soldering required)color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">FC indicator LEDs for visual debuggingcolor:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
BLITZ Mini F7 V1.1 Flight Controller Wiring Suggestion:
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">UART 1 for VTX HD / Analogcolor:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">UART 2 for a Receivercolor:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">UART 3/4/5 for GPS or other sensors that require a serial portcolor:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">UART 6 for ESC Telemetrycolor:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
Package Included:
Flight Controller | 1 x BLITZ Mini F7 V1.1 Flight Controller 1 x FC connectors 1 x Silicon grommets |
Brushless ESC | 1 x BLITZ E55R 4-IN-1 2-6S ESC 1 x Power cables & ESC signal wires |
FC & ESC Stack | 1 x BLITZ Mini F7 V1.1 Flight Controller 1 x FC connectors 1 x Silicon grommets 1 x BLITZ E55R 4-IN-1 2-6S ESC 1 x Power cables & ESC signal wires |
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
color:rgb(0,0,0);font-size:10.5000pt;mso-font-kerning:1.0000pt;">
A part of the review has been auto-translated.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.